 |
| Montech Flyer Black Micro ATX Computer Case |
Micro ATX - a stylish hair surface that takes up very little space. Small but eye-catching air circulation plate with two pre-installed fans for large air circulation; The upper plate features a magnetic protection net with large airflow. Easy to carry and dismantle; Single RGB mode - 7 colors; And 3 switchable RGB tape lighting modes make the plate accurate, so the side panel is made of acrylic with excellent quality and overall performance and is integrated into the power supply with a soft mesh structure, dustproof and removable. This is a small full tower type tower that is easy to close, dismantle and clean. Two 12 cm black fans are preinstalled in the front and rear struts, with a total of 8 fans (front 12 cm * 3 or 14 cm) * 2, which cool 12 cm * 2 or 240 mm above the water surface. Rear 12 cm * 1, internal 12 cm * 2) 2 3.5 hard drives can be installed in the SSD panel in the back hard disk housing and support up to two 2.5 '' USB 2.0 hard drives * 2 / USB 3.0 * 1 / HD audio * 1 / Microphone * 1 / Front light-dial connection Note: This position only applies to Micro-atx and itx motherboards, not to ATX motherboards.
 |
| Montech Flyer Black Micro ATX Computer Case |
Montech Flyer Black Micro ATX Computer Case Specs
- Micro ATX - a stylish hair surface that takes up very little space. Small but beautiful
- Oversized air circulation plate with two pre-installed fans, super surplus, ultra-high roof plate with magnetic dust protection net, easy to transport and stop
- Simple RGB mode - 7 colors, 3 rocking switches for RGB tape to make the side wall acrylic-sensitive, which will improve the overall quality
- The performance and capacity of the compact tower can be combined into the small and medium tower in the power source and has a flexible, dust-proof network that can be removed and cleaned easily. Two black 12 cm pre-installed fans in front and back, which support a total of 8 fans (front 12 cm * 3 or 14 cm *) 2, upper 12 cm * 2 or 240 mm water cooled at the rear 12 cm * 1, inner 12 Cm * 2)
- Two 3.5-inch mini-discs can be installed in the back of the hard drive housing, up to 2 x 2.5-inch USB 2.0 * 2 / USB 3.0 * 1 / High-Resolution Audio * 1 / microphone * 1 / lighting to control button Warning: This housing is only intended For ATX and ITX mini motherboards. It is not suitable for ATX motherboards.