 |
| SGEF Wrist CCTV HD 8MP Portable Camera Tester |
SGEF 6300Aplus Wrist CCTV Tester , 8MP HD Handheld Camera Tester AHD CVBS Tester UTC Control OSD 4.3 Inch TFT LCD Analog Test Cable Tester PTZ Control
6300AP-2 in CCTV Tester
The camera tester is specially developed for the installation and maintenance of cameras on site, with AHD cameras and analog cameras. It also has many useful functions such as video display, UTC/OSD call menu control, trans-axial pan/tilt control, pan/tilt (RS485) control, DC12V output power, sound test, LED lights, etc.
UTC controller:
All OSD menus, support UTC camera, press "M" menu key for 5 seconds to enter, open UTC menu. Press and hold the "M" menu button for 5 seconds to exit UTC mode. (support UTC camera function)
UTC controller:
Switch to UTC mode, you can control the viewfinder zoom, focus and test the continuous rotation of the iris. Support UTC camera function)
 |
| SGEF Wrist CCTV HD 8MP Portable Camera Tester |
- [CCTV TESTER] 4.3 inch 480X272 Resolution PAL / NTSC Dual-in-One Screen (Auto Adjustment) CCTV Tester, Hybrid Camera Tester can test 720P/960P/1080P/3MP/4MP/5MP/8MP AHD cameras, Analog CVBS and Debug cameras ( IP cameras with video display and TVI/CVI cameras are not supported.When troubleshooting the security camera system, the HD LCD video monitor can display clear images.
- [PTZ Control] Supports RS485 and coaxial control, compatible with multiple PTZ protocols (PELCO-D/PELCO-P); Baud rate: 2400, 4800, 9600, 19200 (optional), lens zoom, focus, iris/group, continuous rotation test
- UTC CONTROL Enter the UTC Control / OSD menu, press and hold the menu button M for 5 seconds to enter, UTC will be displayed at the top of the screen. Press the menu button to bring up the camera menu and use the up / down / left / right enter keys to activate the UTC menu. Press and hold the menu button M for 5 seconds to exit UTC mode.
- [Application] UPT/LAN cable, connection status measurement, connection sequence display and no test, sound, multi-language OSD, support 12 languages selection, brightness, contrast and saturation colors can be reset, USB2.0 interface provides emergency power 5V/1A output, DC 12V/1A Power Test
- [Long Working Hours] Rechargeable 3.7V 3000mAh lithium polymer battery, LED emergency light; After 2-3 hours of charging, it can work for 6 hours.