 |
| Wsdcam Wireless Vibration Alarm Anti-Theft Alarm Bike/Motorcycle |
Wsdcam Wireless Vibrating Alarm With Remote Control Burglar Alarm Bicycle / Motorcycle / Car Security Alarm 110dB Loudly Door Window Alarm
Wsdcam Wireless Vibration Alarm is triggered by vibration, suitable for bicycles, motorcycles, vehicles, doors, windows or anything you want to protect, effectively deters thieves with a loud 110 decibel alarm. (Please note that the magnetic sensor part is not necessary for this vibration alarm because it is not a magnetic alarm but a vibration alarm.)
- Remote control of wireless vibrator alerts by detecting a click, tap or swipe (vibrator trigger)
- Remote control range up to 25m
- 10 adjustable sensitivity levels
- More remote controls and alarms have been added. You can program multiple remote controls for one alarm or one remote control for multiple alarms.
- Low power consumption design keeps working for at least one year
- Alarm requires two AAA batteries (not included) to operate.
- 12V/27Ah alkaline batteries required to operate the remote control (supplied)
- 4 modes - arm mode / disarm / panic / doorbell
- Not only the security / burglary alarm, but also the doorbell, in the doorbell mode, the vibrating alarm detects the vibration of the owner's voice "ding dong".
- Low battery warning
Sensitivity adjustable in 10 levels
The factory setting is the highest sensitivity (level 1). Please adapt to your needs before use.
1. Press and hold the Disarm button on the remote control (ignore the beep). The LED on the remote control will turn off for about 3 seconds, then turn on again after 3 seconds, then release the disable button and press the doorbell button to adjust the sensitivity.
2. At maximum sensitivity, the alarm will sound a long "...". Click
The doorbell will switch once, the sensitivity will move to the next level and the siren will emit a short “beep…” At the tenth level, tap again to go to the first level. The higher the level, the lower the sensitivity.
4 modes of remote control
Lever switch: Press to turn on, the alarm will sound at 110 decibels.
Disarm button: press it, arm state or sound will stop.
SOS switch: Press it and the alarm will sound at 110dB even if the alarm does not sound. This feature is useful when someone is in danger or needs urgent help.
Doorbell switch: Press it and when it is on, it will sound a "ding dong" tone to remind you that someone is coming.
Easy to install
Vibration alarm comes with double-sided tape, just peel and stick to install on bike, motorcycle, door and window or anywhere.
Pair more alarms and remote controls
Remove the battery from the siren
Put the battery in the alarm clock and press and hold the ringtone button on the remote control
After hearing the "beep" sound, press the switch and the alarm will sound "beep. Beep" twice. Success
Versatile and versatile
Not only for bicycles, motorbikes and vehicles, but also for homes, studios, rental apartments, offices, hotels, shops, malls and homes.
 |
| Wsdcam Wireless Vibration Alarm Anti-Theft Alarm Bike/Motorcycle |
- Wireless Vibration Alarm with Vibration Detection for bikes, motorcycles, vehicles, doors, windows or anything you want to protect, to effectively deter thieves with a loud 110 decibel alarm.
- Vibrating Alarm with Remote Control, 4 Modes - Arm/Disarm/Panic/Doorbell Mode, Easy Control with Remote, Remote Control Range Up to 82 Feet
- 10 adjustable sensitivity levels, from light touch to pressing or sliding, you can easily adjust to your needs
- Longer battery life with low battery consumption
- Easy to use, install and fix with double-sided stickers or straps