OxGord OBD 2 Check Engine Light Scan Auto Computer Readers with Reset
OxGord OBD 2 Check Engine Light Scan Auto Computer Readers with Reset


OxGord OBD2 Scanner Code Reader Car Diagnostic Tool - OBD 2 Check Engine Light Computer Scanner Auto Reader with Reset - OBD-II Auto Tool Sensor ABS Auto Parts for Car Diagnostic Scanner

Since 1996, the MS309 OBDII Scan Tool from OxGord has made it easy to read diagnostic trouble codes, scan diagnostic trouble codes (DTCs) and turn off check engine lights (MILs) on US vehicles. It also restores the Vehicle Identification Number (VIN) for 2002 and newer vehicles that support Mode 9. Due to its small size, the OBDII code reader fits easily in the palm of your hand and with two buttons, it is very easy to use. The device displays more than 3,000 generic and factory codes on the easy-to-read LCD screen. No more spending money on the mechanic when the check engine light comes on, no more messy laptops or batteries; The device is charged via an OBDII cable. The OBD2 scanner is also an ideal addition to any DIY belt and works with most cars, trucks, vans, and SUVs on the market. OBDII protocol support: SAE J1850 PWM (41.6KB), SAE J1850 VPW (10.4KB), ISO14230-4 KWP (quick format), ISO15765-4 CAN (11bit, 500KB), ISO15765-4 CAN (29 bits, 500 kbaud) packet ISO15765-4 (11-bit, 250 kb) and ISO15765-4 CAN (29-bit, 250 kb). Note that this device must be used with the OBDII 16 PIN protocol. Not suitable for ABS or airbags.

simplified digitization

Once connected to your vehicle's 16-pin OBDII DLC, the device will turn on and prompt you to start the ignition. The device reads and erases generic and manufacturer codes. Also, it is powered by the vehicle's OBDII data link port, eliminating the need for batteries or chargers.

Moreover

The OBD II SCAN MS309 tool can not only read and scan codes, but also can obtain the VIN (Vehicle Identification Number) for 2002 and newer vehicles that support Mode 9.

Compatibility

Fits most 1996 new US OBDII compliant vehicles (including boxes) and supports all OBDII protocols.

Displays over 3000 generic trouble codes, clears trouble codes (DTC) and turns off the check engine light (MIL).

  • Functions: Read or clear manufacturer and general trouble codes, get VIN (Vehicle Identification Number) on 2002 or newer vehicles that support Mode 9, reset airbag lights
  • It's very simple: connect it to the 16-pin connector under the steering wheel, turn on the ignition and start with just two simple buttons.
  • COMPATIBILITY: Works with most 1996 and newer US vehicles that are OBDII and CAN compliant and supports all OBDII protocols as they are required for all US vehicles after that date.
  • LCD Display: Displays the meaning of 3000+ generic trouble code definitions in the database, clears trouble codes (DTCs) and turns off the check engine light (MIL).
  • Hand: Measures 2.75" x 1" x 4.25" (26.25") and weighs just 8 ounces Fits perfectly in the palm of your hand and is powered by your vehicle's data link connector, so you don't even need a battery

Buy on amazon

Previous Post Next Post