Deli AP321 SSD Teardown Reveals iPhone NAND Chips Hidden Under Epoxy

0

 

The box of the 256GB version of the AP321 drive

A teardown of the Deli AP321 256GB NVMe SSD has uncovered an unusual hardware design: NAND flash memory with markings matching chips used in Apple iPhones, concealed beneath thick epoxy and plastic covers. The discovery raises questions about the origin of the memory components and the potential reliability of inexpensive SSDs assembled from repurposed hardware.

The findings come from Chinese hardware repair channel Laocheng Xiaodou, which documented the disassembly in a Bilibili teardown video. The drive is marketed under Deli, a Chinese company primarily known for stationery and office supplies rather than computer storage products.

What the Deli AP321 SSD Teardown Revealed

The examined Deli AP321 is a 256GB M.2 2280 SSD using the PCIe 3.0 interface and NVMe protocol. The video creator purchased it from a third-party seller on Pinduoduo for 207 yuan, approximately $31, after a 51-yuan discount. Its packaging identified Deli Group as the manufacturer, while the anti-counterfeit code reportedly passed verification on the company's website. Deli customer service also confirmed the AP321 as one of its products.

Diagnostic software identified a DRAM-less Maxio MAP1202 controller paired with SanDisk BiCS5 TLC NAND flash. This combination is consistent with budget PCIe 3.0 SSD hardware. However, the physical construction of the memory packages was considerably less conventional.

Instead of standard labeled NAND packages, the SSD contained two unusually thick, unmarked components. After heating and removing their outer covers, the repair specialist discovered chip-on-board packaging sealed beneath epoxy resin. Further disassembly exposed SanDisk-style "SDS" markings resembling those found on NAND packages manufactured for iPhones.

The discovery suggests that the flash memory had been repackaged for use in a conventional SSD rather than supplied in a typical SSD-ready configuration. However, the teardown did not establish whether the components originated from used iPhones, rejected manufacturing stock, or another source.

The Deli AP321 M.2 SSD

Deli AP321 Specifications and Reported Performance

Despite its unusual internal construction, the examined SSD delivered sequential transfer speeds broadly consistent with an entry-level PCIe 3.0 NVMe drive. The teardown creator reported the following configuration and approximate CrystalDiskMark results:

ModelDeli AP321
Tested capacity256GB
Form factorM.2 2280
InterfacePCIe 3.0 NVMe
ControllerMaxio MAP1202 (DRAM-less)
Detected NANDSanDisk BiCS5 TLC
Sequential readApproximately 3,050 MB/s
Sequential writeApproximately 2,100 MB/s

These performance figures should be treated as approximate because the original benchmark screenshot was reportedly lost. They also represent a single examined drive rather than a comprehensive evaluation of the entire AP321 product line. Sequential speeds alone cannot establish sustained write performance, flash endurance, or long-term data retention.

For comparison, GSMGoTech previously covered the Netac 500GB PCIe Gen 3 NVMe SSD, which was advertised with sequential read speeds of up to 1,700 MB/s. The AP321's reported results are higher, although the figures come from different sources and should not be interpreted as a controlled head-to-head comparison.

A FlashID check identifies a DRAM-less Maxio MAP1202 controller and SanDisk BiCS5 TLC NAND

Why Would iPhone NAND Appear Inside a PC SSD?

Smartphone NAND packages are not necessarily interchangeable with standard SSD flash packages. Their electrical connections and packaging can differ, and some incorporate additional control circuitry. According to the teardown creator, adapting the suspected iPhone memory involved removing the original controller section, routing the NAND signals to the SSD's circuit board, and covering the modified assembly with epoxy.

Several explanations remain possible. The components could have been recovered from damaged smartphones, removed during storage upgrades, or sourced from manufacturing rejects. None of these possibilities has been independently confirmed for the examined AP321 drive.

Economic conditions may help explain the interest in recovered memory. A November 2026 report published by Sina described rising demand for salvaged smartphone memory amid tighter memory supplies. According to the report, recovered memory chips can command approximately 40% to 60% of the price of new components, creating financial incentives for recycling and reuse.

Similar Recycled Apple NAND Was Found in Earlier SSDs

The Deli AP321 is not the first inexpensive SSD associated with flash memory originally intended for Apple devices. In August 2023, Tom's Hardware reported a teardown of the ShineDisk M667, a low-cost SATA SSD containing suspected SK hynix NAND manufactured for Apple hardware.

That earlier example involved a different controller and storage interface, but both discoveries illustrate how smartphone-oriented NAND can potentially enter the inexpensive SSD market through unconventional packaging and component reuse.

As storage manufacturers experiment with increasingly compact designs, component engineering remains an important part of SSD performance. GSMGoTech has also covered Biwin's miniature SSD design, which demonstrates a different approach to packaging NVMe storage in a compact form factor.

Two NAND dies covered in thick epoxy and the controller are visible after the drive's sticker is removed

Silkscreen markings that match those on iPhone NAND packages can be read after the thick epoxy is removed

What This Means for SSD Buyers

Using recovered NAND does not automatically mean an SSD will fail. Properly screened flash memory can potentially be reused successfully. The difficulty for buyers is determining the previous condition, remaining endurance, and quality-control history of components whose origins are unknown.

The Deli AP321 teardown provides evidence of unconventional NAND packaging, but it does not demonstrate a specific failure rate or prove that every AP321 uses the same components. Buyers considering unusually inexpensive SSDs should therefore look beyond advertised transfer speeds and consider warranty coverage, manufacturer transparency, independent endurance testing, and the importance of maintaining reliable backups.

One additional detail deserves attention: the examined AP321 reportedly arrived with an MBR partition already configured, an unusual condition for a new retail SSD. That observation alone does not establish prior use, but it reinforces the need for careful verification when purchasing storage from unfamiliar sellers.

The most significant unanswered question remains where the AP321's iPhone-style NAND originated. Until further evidence emerges, the teardown is best understood as a revealing example of repackaged flash memory rather than definitive proof of widespread defects across Deli's SSD products.

Sources: Bilibili, Sina, Tom's Hardware.

Tags:

Post a Comment

0 Comments

Post a Comment (0)