 |
| LGIDTECH FUT038 Miboxer RGBW LED Strip Light |
LGIDTECH FUT038 Miboxer RGBW LED Strip 2.4GHz Radio Frequency 4 Zones DC 12-24V Controller. RGBW remote control, B3 T3 board or WiFi hub required, all sold separately, not programmable
1) This device cannot be used standalone, and must be controlled via RGBW or RGB + CCT remote controller, B3 B4 wall panel or smartphone APP controlled via iBox1 or iBox2 bridge hub. Each sold separately! ! ! Not applicable to Zone 8 remote control and B8 wall plate.
2) Please make sure your LED strip is RGBW (RGB + any kind of white). If your LED strip is RGB, please choose the FUT037 controller as it will flash white when connected to this controller, but the LED strip is RGB does not have white. You may think that our product is damaged.
3) This controller is used with the LED light strip at the bare wire end. If your LED has a 5-pin connector, cut it out.
4) The maximum load of the DC 12 LED strip is 120W and the DC 24V load is 240W. Please check the power of the LED strip before use.
5) If you have any questions before purchasing, please tell us, we will reply you as soon as possible, sometimes within 30 meters, so that you can have a good experience.
How does this work?
- Remote control: Use the 2.4GHz 4-zone RGBW remote control, you can control the LED light strip console within 30 meters and you don't need to point the remote close to the console. 4 zone controllers, singly or combined! The remote control is not included in this package!
- WiFi Smartphone Control: You can use Mi-Light 3.0 APP to control lights on IOS and Android smartphones via Mi.Light from iBox wifi. Even when you are not at home, you can still control the flashlight with your phone as long as your phone has 3G/4G/WiFi signal. WiFi iBox is not included in this package!
- Wall Panel Switch Control: RGBW Panel Controller can also be installed on the wall, AC 90-120V, don't worry about low battery or 2*AAA battery type, don't worry, you don't need to drill holes on the wall, just stick it on the wall . You can easily control all the light strips!
- The maximum load for the DC 12V LED strip is 120W and the DC 24V load is 240W. Please check the power of the LED strip before use.
- This single console does not support LED light strips. Please check the remote control, iBox WiFi and the panel controller.
 |
| LGIDTECH FUT038 Miboxer RGBW LED Strip Light |
- ** The remote control cannot be used, please attach this remote control before using the instructions! NOT PROGRAMMABLE** 1) REMOTE CONTROL (*** NOT APPLY TO 8-ZONE REMOTE CONTROL ***): You can control this console cassette with a 2.4GHz wireless remote control, ASIN B01N57JJAA. 30m=98ft Control distance, high wall capacity, you can easily control the LED strips. The remote control is not included in this package!
- 2) Smartphone APP Control: With Mi.Light WiFi iBox1 (ASIN B01MRPMW2X) iBox2 or WL-Box1 (ASIN B01N7C3HXQ) you can control the LED light strip console receiver box on the smartphone. Your home WiFi, you can control it anywhere in the world. WiFi iBox is not included in this package!
- 3) Wall Panel Controller: Install a panel controller on your wall, it has the same function as a remote control, and it is very nice! If you do not want to open the wall-mounted B3 ASIN B01N1V36DF, it is powered by two AAA batteries. If you don't want to change the battery often, please check T3 ASIN B01N2WO0E0, which runs on 90-120VAC. The onboard controller is not included in this package!
- 4) The working voltage of the LED light strip is DC 12-24V, and the input must match the working voltage of the LED strip, DC 12V or DC 24V.
- 5) The package only contains this receiver, does not include the remote control, Yibao Box Wifi and the control board! Welcome to our store for displaying RGBW LED Strip (ASIN B074J4ZBSV), other color LED strip controller, and other Mi.Light LED series. Please use the manual to connect your iBox remote, wall plate or hub to this console before use.