 |
| The Morefine G2 will start shipping from May 20, 2026. Pictured: a promo picture showing its compact design. |
The external GPU market just got a fascinating new contender. Morefine, a brand known for pushing the boundaries of compact computing, has officially unveiled the G2 – an eGPU enclosure that packs a full desktop-class Nvidia RTX 5060 Ti with 16GB of GDDR7 VRAM. That’s right, not a mobile chip, not a cut-down version. It’s the real deal, and it’s coming to a laptop near you – provided you have the right port.
Before we dive into the nitty-gritty, let’s address the elephant in the room. Morefine hasn’t shared any official performance metrics yet. No frame rates, no synthetic benchmarks, no “up to X% faster than…” claims. That’s a little unusual, but given the hardware inside, it’s safe to assume this little box will chew through most modern titles at 1440p and even 4K with some settings tweaked. The real story here, however, is how the G2 connects to your host device.
OCuLink 4.0 vs. Thunderbolt 5: The Bandwidth Battle
The Morefine G2 comes equipped with an OCuLink 4.0 x4 port. For the uninitiated, OCuLink (Optical Copper Link) is a PCIe extension interface that offers a direct, low-latency connection to your system. Unlike older eGPU solutions that bottleneck through controller chips, OCuLink provides a more straightforward pipeline. There will be a certain level of performance drop compared to an internal desktop GPU, but with OCuLink, it typically doesn't exceed a quarter – roughly 20-25% in the worst cases – if paired with a capable host (think modern Intel or AMD laptop with a decent CPU).
That’s a far cry from the 30-40% drops we used to see with Thunderbolt 3 and even some Thunderbolt 4 implementations. For gamers and creators, that’s a manageable compromise when you consider the portability gains.
But what if your laptop doesn’t have an OCuLink port? Don’t worry. Morefine also threw in a Thunderbolt 5 port (which also works with the USB4 v2 interface). Thunderbolt 5 doubles the bandwidth of its predecessor, reaching up to 80Gbps in bidirectional mode and up to 120Gbps in asymmetric mode (more down, less up). That’s impressive, but here’s the kicker – OCuLink will still offer better gaming performance than Thunderbolt 5. Why? Latency and protocol overhead. Thunderbolt encapsulates PCIe data into its own packets, while OCuLink is essentially a pure PCIe extension. For frame-time sensitive workloads, that matters.
Ports, Power Delivery, and Practicality
The rear I/O of the G2 is surprisingly generous. You get:
- One upstream Thunderbolt 5 (for host connection, with 100W Power Delivery)
- One downstream Thunderbolt 5 (for daisy-chaining, supports 4K display at 144Hz)
- Three USB 3.2 Gen 1 Type-A (5Gbps each – great for your mouse, keyboard, and a USB drive)
- One HDMI 2.0 (4K at 60Hz, fine for secondary monitors)
- One DisplayPort 1.4 (up to 8K at 60Hz or 4K at 144Hz)
The upstream Thunderbolt 5 port is particularly clever. It can deliver up to 100W Power Delivery to your host laptop. So while you’re pumping GPU signals into your machine, you’re also charging it. One cable to rule them all – that’s the dream. Morefine even highlights a specific 5-feet Silkland TB5 cable that’s currently $24.95 on Amazon. Check it out here if you want a reliable, certified cable for this setup. Cheap cables can ruin the experience, so don’t skimp.
One more thing on the downstream Thunderbolt 5 port: it’s not just for displays. You could theoretically chain another Thunderbolt device, like a fast SSD or a second monitor, without losing much sleep over bandwidth. For a compact eGPU, that’s a nice touch.
Size, Weight, and The External PSU Trade-off
At first glance, the G2 is impressively tiny. Morefine lists its dimensions as 140 x 100 x 54mm (about 5.5 x 3.9 x 2.1 inches). That’s smaller than many books. The claimed weight is a featherlight 700 grams (roughly 1.5 lbs). How did they achieve that with a desktop RTX 5060 Ti inside? Simple: they outsourced the power supply.
Yes, the G2 relies on an external PSU (power brick). That’s a double-edged sword. On the plus side, the main unit stays compact and travel-friendly. You can toss it in a backpack without feeling like you’re carrying a cinderblock. On the minus side, you now have two things to plug into the wall – the eGPU itself (via its brick) and your laptop’s charger if the 100W PD isn’t enough (though for most ultrabooks, 100W is plenty). For gaming laptops that need 180W+, you’ll still need your original charger. Keep that in mind.
Three Fan Modes: Quiet or All-Out Performance
Noise is always a concern with eGPUs – they sit on your desk, often closer to you than a tower PC. Morefine seems to have thought about this. The built-in fan has three operating modes, letting you switch between a quiet, low-RPM state for office work or media consumption, and a performance mode that ramps up cooling when you’re deep into a gaming session. There’s presumably a balanced mode in between. Without decibel measurements, we can’t say how “quiet” quiet truly is, but having the option is a step up from many eGPU enclosures that just run one profile (usually loud).
Pre-Order Details and Pricing
Here’s where things get real. The Morefine G2 is currently in the pre-order phase, and the price is set at $1,099. That’s not pocket change, but let’s put it into perspective. A standalone RTX 5060 Ti (when it launches for desktop) will likely cost around $450-500. Add a good Thunderbolt 4/5 enclosure – those run $200-350. Then add the compact engineering, the dual ports (OCuLink + TB5), and the fact that this is a complete, ready-to-run solution. The premium is there, but it’s not outrageous for early adopters.
Morefine says these early orders are expected to ship by May 20, 2026. That’s a bit over three weeks from now. If you’re tired of your laptop’s integrated graphics or weak mobile GPU, and you don’t want to build a full desktop, this could be your ticket.
Worth the Wait? A Few Parting Thoughts
The eGPU market has always been a niche within a niche. Most people either buy a gaming laptop with a decent dGPU or build a desktop. But there’s a third group – professionals and creatives who need a thin, light, long-battery laptop for work, but also want to game or render at home without buying two separate machines. For that crowd, the Morefine G2 looks promising.
The inclusion of OCuLink 4.0 is a bold move. Most eGPUs still rely on Thunderbolt because it’s more common on Macs and high-end Windows laptops. But OCuLink is gaining traction on mini-PCs and some gaming handhelds (like the GPD Win series and OneXPlayer). If you own a device with an OCuLink port, you’ll get noticeably better performance – less stutter, higher 1% lows, and overall smoother gameplay.
For everyone else, Thunderbolt 5 will do just fine. And the ability to push 4K at 144Hz through the downstream port means you can actually use this with a high-refresh-rate monitor without daisy-chain nightmares.
Is $1,099 a lot? Yes. But you’re paying for compactness, versatility, and the convenience of not tearing open a desktop. If you’re already eyeing an RTX 5060 Ti build, and you have a compatible laptop, the G2 might just be the strangest, coolest upgrade you buy this year.
Specs at a glance (from Morefine’s official sheet):
| Feature | Detail |
|---|---|
| GPU | Desktop Nvidia RTX 5060 Ti, 16GB GDDR7 |
| Host Interfaces | OCuLink 4.0 x4, Thunderbolt 5 (USB4 v2 compatible) |
| Downstream Ports | Thunderbolt 5 (4K 144Hz), HDMI 2.0, DP 1.4, 3x USB 3.2 Gen 1 |
| Power Delivery | Up to 100W via upstream TB5 to host |
| Dimensions | 140x100x54 mm |
| Weight | ~700 g |
| Cooling | 3-mode fan (performance / balanced / quiet) |
| Price (Pre-order) | $1,099 |
| Ship date | May 20, 2026 |
For the full spec sheet and official details, head over to Morefine’s product page. And if you decide to go the Thunderbolt 5 route, don’t forget a high-quality cable – the Silkland TB5 cable on Amazon is a solid pick at $24.95 for 5 feet.
The Morefine G2 isn’t for everyone. But for the road warrior who refuses to compromise on graphics at the hotel desk? It might just be the perfect weird little box. We’ll have to wait for real-world benchmarks to know for sure, but on paper, this is one of the most interesting eGPUs to launch in years.
 |
| Ports of the Morefine G2 eGPU |
 |
| Main highlights of the Morefine G2 eGPU |
 |
| Full specs of the Morefine G2 eGPU |