Review Anidees AI Crystal XL PRO PC Gaming Case
Anidees AI Crystal XL PRO PC Gaming Case

Anidees AI Crystal XL PRO RGB Full Cover Tempered Glass XL-ATX / E-ATX / ATX Supports 480/360 heat sink, optical drive including 120 x 5 PWM / LED RGB lights with x2 PC fan AI AI PRO PRO RGB housing

PWM and RGB controlled lighting ready
The fan hub is used to connect additional fans and LED light strips, as well as to synchronize light effects with megabytes or remote.

Visual effects x high air volume
High flow ventilation grille, piece of tempered glass for best visual effect, including two front panels.

Graphics card holder
The very tall and heavier graphics card holds it in place.

Very general layout
Optical drive x 12 or HDD / SSD x12 (use a 3.5 '' hard drive bracket for 5.25 '' drive bay, with two parts)

Multiple cooling support
Wheel fans 360mm or 120mm x 4 can be installed on multiple side supports.
Review Anidees AI Crystal XL PRO PC Gaming Case
Anidees AI Crystal XL PRO PC Gaming Case

Multiple cooling support
A 360mm or 120mm x 3 wheel fan can be installed on top of the power supply cover.

Anidees AI Crystal XL PRO PC Gaming Case Specs
  • Facial adjustment: High-flow mesh protective cover, tempered glass cover for better visual effects, including two face panels
  • Flexible housing: ODD x 12 or HDD / SSD x 12 on the front removable cover. Front fan mounting makes installation easy
  • Effective cooling solution: up to 120mm x 20, 5 pre-installed AI-Tesseract Duo RGB fans, including 120mm x 4 and 120mm x 1 at the back, provide excellent heat dissipation and a dynamic electronic gaming atmosphere. Multiple coolers: Front top support / 480 wheels max, side / bottom (on the power supply cover) can hold up to 360 wheels, the front side, side, up and down can carry removable dust filter from 140/120 wheels Easy to take care of.
  • Wide compatibility: HPTX support (13.6 "x 15"). XL-ATX E-ATX (12 x 13 inches), ATX, m-ATX, Mini-ITX Motherboard; The maximum graphics card length is 530 mm, and the maximum vertical GPU thickness is 49 mm. Max height of processor cooler 190 mm; The power source can reach 300 mm.
  • Easy-to-use RGB function: With the fan hub, you can control fan speed and LED mode via the remote control or connect to the motherboard and control fan speed via PWM, ASUS Aura Sync, MSI Mystic Light Sync (J-rainbow) and GB / Fusion 2.0 (3 addressing pins on a 5-volt connector on the motherboard).

Previous Post Next Post