 |
| Tupavco TP560 4G/LTE Cellular MIMO Antenna |
4G / LTE-9dBi Cellular Antenna X-POL-MIMO (± 45 °) Omni-directional polarization signal in one antenna (cellular hot spot amplifier with high gain) RP-SMA 6FT connection cable with TS-9-Tupavco TP560 adapter
The main advantage of this dual polarization antenna is that it can focus multiple signals in one direction to obtain a larger gain.
The technology used by the TPG-3IM / 4G / LTE-MIMO antenna can increase the data capacity of 4G / LTE data services by using the multipolar antenna and receiving antennas. The main advantage of this dual polarization antenna is that it allows multiple signals to be focused in one direction to achieve a greater number of gains. Improve signal strength and data speed in remote areas with weak signal coverage for cells (such as warehouses, ships, rural areas) ...
In the MIMO system, the same data is sent through multiple antennas on the same path along the same path. Therefore, each signal arrives at the receiving antenna via a different path, which results in more reliable data. The data rate is also increased by a factor that is determined by the number of transmitting and receiving antennas.
The Tupavco TP560 Antenna is used to connect direct cable to cellular data devices via two antenna headers. Use the Y splitter to connect the two antenna cables to a device with a single antenna connector.
The compact and highly adaptable design saves time and space. The antenna is for connection to the mast. Comes with washers, bolts, nuts, U-bolts, mounting brackets and mounting plates. Mast axle is not included. TTEavco TP560 LTE MiMo antenna is used to route data packets to the base station. If it is pointing in the correct direction then the signal / reception will increase.
 |
| Tupavco TP560 4G/LTE Cellular MIMO Antenna |
- Horizontally multi-polarized MIMO antennas (± 45 °) with multiple inputs and multiple outputs send and receive in a single housing and focus multiple signals on remote cell towers at remote locations with poor cellular signal coverage.
- Collect and improve cell tower signal strength, then send it over the wire to speaker, mobile phone, hotspot, 4G router / modem, or cellular data card
- 6ft Kaplan with RP-SMA and other TS-9 sockets, depending on the plug type of your device. The antenna is used to be connected directly to the cellular data device via two antenna connections
- Multi-band frequencies (698-960; 1710-2170; 2300-2700MHz) can be used with all major data providers in the USA
- Compact structure, light materials, weather and corrosion resistance, suitable for both outdoor and indoor use. Includes fixing materials